ECO GOLD
56 Maintenance 25/08/2011/ YACE0088
8.3 Servicing
Follow all the safety information for cleaning and servicing the device.
Caution !
Critical temperature of device parts, heat transfer liquid or
accessories (hoses)
Burns, scalds, frostbite
• Bring the device parts, accessories and heat transfer
liquid to room temperature before touching them.
• Have repairs carried out only by a specialist.
• Affix the symbol "Hot surface".
8.3.1 Cleaning
Warning !
Live parts in contact with cleaning agents
Electric shock hazard
• Disconnect the device from the mains before clean-
ing.
Cleaning can be carried out with water with a few drops of a surfactant (washing-up liquid) added and with
the aid of a damp cloth.
Notice
Live parts in contact with cleaning agents
Property damage
• Disconnect the device from the mains before clean-
ing.
• Water and other liquids must not enter the control
head.
Only clean the control head with the cleaning agents, water (with washing-up liquid), petroleum benzine or
ethanol.
Do not use any acetone or aromatic hydrocarbons (dilution) This would lead to permanent damage to the
plastic surfaces.
Before all maintenance or cleaning work you must ensure that decontamination of the device is carried out
if it has been in contact with hazardous materials.
To Next Page
Loading...
Need help?
General
