Lauda E 4 G - A.8 Restoring the factory setting of the internal temperature sensor

ECO GOLD
25/08/2011/ YACE0088 Appendix with settings 85
A.8 Restoring the factory setting of the internal temperature sensor
If the offset has been adjusted, the factory setting can be restored again.
− Access to the main menu level is obtained by pressing the
enter key
.
− Selection and confirmation of Æ Setup Æ Calibration.
The adjacent menu window appears.
− Select and confirm Factory calibration with or and .
The adjacent menu window appears.
− Select "yes" using
or and confirm with to restore
the factory settings.
− By pressing "no"
(ESC) or you are returned to the menu level without any change.
ESC
סּ OK
Standby
Calibration
Calibration
Factory Calibration .
ESC
סּ OK
Standby
Factory calibration
no
yes .