ECO GOLD
38 Operation 25/08/2011/ YACE0088
7 Operation
Always follow this safety information:
Warning !
Control head drops into bath
Electric shock hazard
• Make sure that the control head mounting is securely
joined to the bath.
Warning !
Introduction of low-boiling liquid (e.g. water into hot oil),
change of liquid properties
(reduction of fire point)
Explosion, burns, scalds, fire
• Site the device in suitable premises.
• Avoid dripping water and condensation.
• Do not position any small parts and liquids above the
device.
• Keep the cover on the thermostat (if present) closed.
• Prevent the ingress of secondary liquids (e.g. from
customer's heat exchanger).
• Do not work with liquids in the direct vicinity of the
device.
• Check the heat transfer liquid at least every six
months (e.g. mixing ratio with a hydrometer).
Caution !
Skin contact with heat transfer liquid or hot / cold sur-
faces
Burns, scalds, frost bite, impacts, cuts,
snagging
• Only operate the device with its housing.
• Avoid splashes and hand contact with hot or cold
heat transfer liquid.
• Use CE gloves, protective clothing and eye protec-
tion.
• Affix the symbol "Hot surface".
• Do not touch the connecting and drainage points in
the operating state.
Caution !
Contact with vapors from the heat transfer liquid
Harmful by inhalation
• Use an extractor hood.
• If possible, use a bath cover.
To Next Page
Loading...
Need help?
General
