Leerjet 35/36 Developed for Training Purposes 2B-77
December 1998
Expanded Normal Procedures
Taxi
If the airport surfaces are sandy or dust covered, avoid the
exhaust wake and propwash of other airplanes.
Takeoff
Ensure takeoff performance is adequate for the conditions and
runway length.
Shutdown and Postflight
Install all aircraft protective covers.
Do not allow sand or dust to enter fuel tanks while refueling.
Do not leave reflective objects in the cockpit or on the
glareshield; reflected heat can distort the windshield optical
properties.
To Next Page
Loading...
