Learjet 35/36 Developed for Training Purposes 2C-25
July 2004
Standard Operating Procedures
Precision Approach Deviations
PF PM
± One Half Dot – Glideslope
CALL “One half dot (high,
low) and (increasing,
holding,
decreasing).”
CALL “Correcting.”
± One Half Dot – Localizer
CALL “One half dot (right,
left) and (increasing,
holding,
decreasing).”
CALL “Correcting.”
V
TGT
± ____________
CALL “Speed (plus or
minus) _____ (knots)
and (increasing,
holding,
decreasing).”
CALL “Correcting.”
At or Below V
REF
CALL “V
REF
.” or
“V
REF
minus _____
(knots below V
REF
).”
CALL “Correcting.”
Rate of Descent Exceeds 1,000 FPM
CALL “Sink _____
(amount) hundred
and (increasing,
holding,
decreasing).”
CALL “Correcting.”
L3CRH_SOP.fm Page 25 Monday, July 30, 2007 10:51 AM