Learjet 35 - ICAO Flight Plan Form Completion - Items 7-19

Leerjet 35/36 Developed for Training Purposes 5-19
February 1998
Flight Planning
ICAO Flight Plan Form Completion –
Items 7-19
Complete all ICAO flight plans prior to departure. Although the
ICAO flight plan form is printed in numerous languages, the for-
mat is always the same.
Always enter cruising speed and cruising level as a group. In
the body of the flight plan form, if one item changes, the other
item must be re-entered to keep speed and level a matched
pair.
Always enter latitude and longitude as 7 or 11 characters. If
entering minutes of one, enter minutes of the other as well,
even if zeros.
Significant points should not be more than one hour apart. Con-
sider entering overflight/landing permissions after RMK/ in Item
18.
Item 7: Aircraft Identification
(7 characters maximum)
Insert (A) the aircraft registration marking or (B) aircraft operat-
ing agency ICAO designator followed by the flight identification.
A. Insert only the aircraft registration marking (e.g., EIAKO,
4XBCD, N2567GA) if one of the following is true:

the aircraft’s radiotelephony call sign consists of the air-
craft registration marking alone (e.g., OOTEK)

the registration marking is preceded by the ICAO tele-
phone designator for the aircraft operating agency (e.g.,
SABENA OOTEK

the aircraft is not equipped with radio.