2C-8 Developed for Training Purposes Learjet 35/36
July 2004
CAE SimuFlite
Monitor NDB audio output at any time that the NDB is in use as
the NAVAID. Use the marker beacon audio as backup to visual
annunciation for marker passage confirmation.
In tuning the VHF radios for ATC communication, the PM
places the newly assigned frequency in the head not in use
(i.e., preselected) at the time of receipt. After contact on the
new frequency, the PM retains the previously assigned fre-
quency for a reasonable time period.
Altitude Assignment
The PM sets the assigned altitude in the altitude alerter and
points to the alerter while orally repeating the altitude. The PM
continues to point to the altitude alerter until the PF confirms
the altitude assignment and alerter setting.
Pre-Departure Briefings
The PIC should conduct a pre-departure briefing prior to each
flight to address potential problems, weather delays, safety
considerations, and operational issues.
Pre-departure briefings should include all crewmembers to
enhance team-building and set the tone for the flight. The brief-
ing may be formal or informal, but should include some stan-
dard items. The acronym AWARE works well to ensure that no
points are missed. This is also an opportunity to brief the crew
on any takeoff or departure deviations from the SOP that are
due to weather or runway conditions.
NOTE: The acronym AWARE stands for the following:
Q
Aircraft status
Q
Weather
Q
Airport information
Q
Route of flight
Q
Extra
L3CRH_SOP.fm Page 8 Monday, July 30, 2007 10:51 AM
To Next Page
Loading...
