Learjet 35 - FAA Flight Plan Form Completion Instructions

Leerjet 35/36 Developed for Training Purposes 5-29
February 2007
Flight Planning
FAA Flight Plan Form
Completion Instructions
Block 1 Check the type flight plan. Check both the VFR
and IFR blocks if composite VFR/IFR.
Block 2 Enter your complete aircraft identification,
including the prefix “N,” if applicable.
Block 3 Enter the designator for the aircraft, or if
unknown, the aircraft manufacturer’s name.
When filing an IFR flight plan for a TCAS
equipped aircraft, add the prefix T for TCAS .
Example: T/G4/R .
When filing an IFR flight plan for flight in an air-
craft equipped with a radar beacon transponder,
DME equipment, TACAN-only equipment or a
combination of both, identify equipment capabil-
ity by adding a suffix to the AIRCRAFT TYPE,
preceded by a slant (/) as follows:
/X no transponder
/T transponder with no altitude encoding capa-
bility
/U transponder with altitude encoding capability
/D DME, but no transponder
/B DME and transponder, but no altitude encod-
ing capability
/A DME and transponder with altitude encoding
capability
/M TACAN only, but no transponder
/N TACAN only and transponder, but with no alti-
tude encoding capability
/P TACAN only and transponder with altitude
encoding capability
/Y LORAN, VOR/DME, or INS with no transpon-
der