Learjet 35 - Taxiing

2B-62 Developed for Training Purposes Leerjet 35/36
December 1998
CAE SimuFlite
Taxiing
During taxi, the aircraft is controlled via nosewheel steering,
brakes, and selected engine thrust through rudder pedal.
Taxiing can be accomplished with one or both engines oper-
ating.
Pilot Stations . . . . . . . . . . . . . . . . . . . . . . . BOTH OCCUPIED
Wheel Chocks/Mooring Ropes . . . . . . . . . . . . . . REMOVED
Control Gust Lock . . . . . . . . . . . . . . . . . . . . . . . . . REMOVED
Grounding Cables . . . . . . . . . . . . . . . . . . . . . . . . . REMOVED
Engine Inlet and Exhaust Covers. . . . . . . . . . . . . REMOVED
Area. . . . . . . . . .CLEAR OF PERSONNEL AND EQUIPMENT
Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . START
Start one engine according to engine starting procedure.
Parking Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . RELEASED
Release the parking brake and start taxi roll using only suffi-
cient thrust to start roll.
After taxiing:
Parking Brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SET
Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SHUT DOWN
Shut the engine down according to engine shutdown proce-
dure.
After the engine has cooled, install engine inlet and
exhaust covers.
Parking Procedure. . . . . . . . . . . . . . . . . . . . . . . . . PERFORM
CAUTION: Ensure personnel and equipment are clear of
engine inlet and exhaust when engine is operating.