Learjet 35 - Page 167

Learjet 35/36 Developed for Training Purposes 2C-21
July 2004
Standard Operating Procedures
Precision Approach (continued)
PF PM
At 500 ft Above DA(H)
CALL “500 ft to minimums.”
CALL “Check.”
NOTE: An approach window has the following parameters:
Q
within one dot deflection, both LOC and GS
Q
IVSI less than 1,000 fpm
Q
IAS within V
AP
± 10 kt (no less than V
REF
or 0.6 AOA,
whichever is less)
Q
no flight instrument flags with the landing runway or visual
references not in sight
Q
landing configuration, except for full flaps (non-precision or
single engine approaches)
When within 500 ft above touchdown, the aircraft must be within
the approach window. If the aircraft is not within this window, a
missed approach must be executed.
At 200 ft Above DA(H)
CALL “200 ft to minimums.”
CALL “Check.”
At 100 ft Above DA(H)
CALL “100 ft to minimums.”
CALL “Check.”
L3CRH_SOP.fm Page 21 Monday, July 30, 2007 10:51 AM