Learjet 35 - Page 175

Learjet 35/36 Developed for Training Purposes 2C-29
July 2004
Standard Operating Procedures
Non-Precision Approach (continued)
PF PM
At 500 ft Above MDA
CALL “500 ft to minimums.”
CALL “Check.”
NOTE: An approach window has the following parameters:
Q
within one dot CDI deflection or 5 degrees bearing
Q
IVSI less than 1,000 fpm
Q
IAS within V
AP
±10 kt (no less than V
REF
or 0.6 AOA, whichever
is less)
Q
no flight instrument flags with the landing runway or visual
references not in sight
Q
landing configuration, except for full flaps (non-precision or
single engine approaches)
When within 500 ft above touchdown, the aircraft must be within
the approach window. If the aircraft is not within this window, a
missed approach must be executed.
At 200 ft Above MDA
CALL “200 ft to minimums.”
CALL “Check.”
At 100 ft Above MDA
CALL “100 ft to minimums.”
CALL “Check.”
At MDA
CALL “Minimums. _____
(time) to go.” or
“Minimums. _____
(distance) to go.”
CALL “Check.”
L3CRH_SOP.fm Page 29 Monday, July 30, 2007 10:51 AM