Leerjet 35/36 Developed for Training Purposes 4L-9
February 1998
Thrust Reversers
Emergency Stow Cycle
Placing the NORM/EMER STOW switch in the EMER STOW
position removes electrical power from the normal thrust
reverser electrical system and applies power directly to both
air-on valves. The valves open to supply bleed air pressure to
the pneumatic actuators. The pneumatic actuators then drive
the translating structure to the stowed position.
With thrust levers in CUTOFF or above 70% power lever angle
(PLA), the emergency stow system is inoperative.
To Next Page
Loading...
