5-22 Developed for Training Purposes Leerjet 35/36
February 1998
CAE SimuFlite
SSR Equipment: Insert one of the following letters to describe
the operative SSR equipment on board:
N None
A Transponder Mode A (4 digits- 4 096 codes)
C Transponder Mode A and Mode C
X Transponder Mode S without aircraft ID or pressurealti-
tude transmission
P Transponder Mode S with pressure altitude transmission,
but without aircraft ID transmission
I Transponder Mode S with aircraft ID transmission, but
without pressure-altitude transmission
S Transponder Mode S with both pressure altitude and air-
craft ID transmission
Item 13: Departure Aerodrome (4 characters)
and Time (4 characters)
Departure Aerodrome: Insert one of the following:
ICAO four-letter location indicator of the departure aero-
drome.
If no location indicator assigned, insert ZZZZ, then spec-
ify in Item 18 the name of the aerodrome, preceded by
DEP/.
If flight plan submitted while in flight, insert AFIL, then
specify in Item 18 the four-letter location indicator of the
ATS unit from which supplementary flight plan data can
be obtained, preceded by DEP/.
Time: Insert one of the following:
for a flight plan submitted before departure: the estimated
offblock time
for a flight plan submitted while in flight: the actual or esti-
mated time over the first point of the route to which the
flight plan applies
To Next Page
Loading...
