Leerjet 35/36 Developed for Training Purposes 5-31
October 2000
Flight Planning
Block 4 Enter your true airspeed (TAS).
Block 5 Enter the departure airport identifier code, or if
code is unknown, the name of the airport.
Block 6 Enter the proposed departure time in Coordi-
nated Universal Time (UTC). If airborne, specify
the actual or proposed departure time as appro-
priate.
Block 7 Enter the appropriate IFR altitude (to assist the
briefer in providing weather and wind informa-
tion).
Block 8 Define the route of flight by using NAVAID identi-
fier codes, airways, jet routes, and waypoints.
Block 9 Enter the destination airport identifier code, or if
unknown, the airport name. Include the city
name (or even the state name) if needed for
clarity.
Block 10 Enter estimated time enroute in hours and min-
utes.
Block 11 Enter only those remarks pertinent to ATC or to
the clarification of other flight plan information,
such as the appropriate call sign associated with
the designator filed in Block 2 or ADCUS.
Block 12 Specify the fuel on board in hours and minutes.
Block 13 Specify an alternate airport, if desired or
required.
Block 14 Enter the complete name, address, and tele-
phone number of the pilot in command. Enter
sufficient information to identify home base, air-
port, or operator. This information is essential for
search and rescue operations.
Block 15 Enter total number of persons on board (POB),
including crew.
Block 16 Enter the aircraft’s predominant colors.
To Next Page
Loading...
