Leerjet 35/36 Developed for Training Purposes 2B-71
December 1998
Expanded Normal Procedures
Fuel Systems . . . . . . . . . . . . . TOPPED OFF AS REQUIRED
Cabin Door . . . . . . . . . . . . . . . . . . . . CLOSED AND LOCKED
Attach red tag to cabin door handle with the following nota-
tion: “AIRCRAFT PREPARED FOR INDEFINITE STORAGE
(MORE THAN SIX MONTHS) (DATE OF STORAGE).”
Landing Gear
Struts and Actuators . . . . . . . . . . . . . . . . . . . . . . .SERVICED
After aircraft has been stored for 12 months, remove barrier
material from landing gear struts and actuators. Wipe
hydraulic fluid off struts and actuators and apply a fresh light
coating of hydraulic fluid and wrap struts and actuators with
new barrier material. Secure and seal with black tape.
Replace tape that attaches barrier material to aircraft every
six months.
Windshield and Windows . . . . . . . . . . . . . . REPLACE TAPE
Every Six Months
Replace tape that attaches protective covers to the aircraft
every six months. Use care when servicing not to gouge or
scratch the windshield or windows.