252 WM-OM-E Rev I
account is needed.
4. If you chose MAPI, touch inside the Originator Address (From:) data entry field and use
the pop-up keyboard to type in the instrument's e-mail address. Then touch inside the
Default Recipient Address (To:) data entry field and use the pop-up keyboard to enter
the recipient's e-mail address.
5. If you chose SMTP, touch inside the SMTP Server data entry field and use the pop-up
keyboard to enter the name of your server. Touch inside the Originator Address (From:)
data entry field and use the pop-up keyboard to type in the instrument's e-mail address.
Then touch inside the Default Recipient Address (To:) data entry field and use the
pop-up keyboard to enter the recipient's e-mail address.
6. You can send a test e-mail text message by touching the Send Test Mail button. The test
message reads "Test mail from [name of scope's email address]."
Acquisition Status
For each general category of scope operation, you can view a summary of your setups. These
dialogs are not accessible through the Utilities menu, but are instead accessed from the menu bar
drop-down menus. The categories are as follows:
• Vertical -- select Channels Status . . . from drop-down menu
• Timebase -- select Acquisition Status . . . from drop-down menu
• Trigger -- select Acquisition Status . . . from drop-down menu
• Math -- select Math Status . . . from drop-down menu
In addition to these dialogs, summaries are also provided for XY setups, memory (M1-M4) setups,
and time stamps for sequence mode sampling.
Service
This button provides access to service dialogs, which are for the sole use of LeCroy
service personnel. A security code is required to gain access.
Show Windows Desktop
Touching the Show Windows Desktop button in the main "Utilities" dialog minimizes the
instrument application to reveal the underlying desktop. To maximize the application, touch the
appropriate shortcut icon:
To Next Page
Loading...
