LeCroy WavePro 7300A - Properties of the Control and Its Objects

328 WM-OM-E Rev I
Project1.ocx from the File menu.
7. Install the PlugIn in the instrument. A. Start the instrument. B. Select ActiveDSO in the
Analysis Menu. C. Select PlugIns mode. D. Type “Project1.UserControl1” in the “COM
ProgID of Plug-In” text box. E. Click the Install button under the text box.
8. Now Click the new Auto and Single buttons to see their effects.
Properties of the Control and its Objects
Using the View Properties button in Visual Basic, you can customize your PlugIn to your exact
requirements. Among the most useful properties are the following: Height, Width, BackColor, Name,
Caption.
You can gain access to the properties of your objects by Clicking V
iew - Properties. Positions and
sizes of objects can be changed from View - Object, by dragging the object or one of its handles.
You can insert any available control into your plug-in. The basic control set is shown in a toolbar at
the left of the screen in the picture below. Double click on any control to insert it into the plug-in. In
the following example, a command button has just been inserted.
In the next example you can see a command button, a picture box, a list box and a Tabbed Dialog
Control.