LeCroy WavePro 7300A User Manual

310 WM-OM-E Rev I
For K = 0 To LastPoint
ExcelApp.ActiveSheet.Cells("ExcelRow + K, ExcelColumnA ") = -USD(K)
Next
Once the data are in Excel, any Excel functions can be applied to the data.
The results can be returned to the VB script.
For K = 0 To LastPoint
NDA(K) = ExcelApp.ActiveSheet.Cells("ExcelRow + K, ExcelColumnB")
Next
Transferring data cell by cell is very slow, so it is better to do a block transfer.

LeCroy WavePro 7300A Specifications

General

Bandwidth	3 GHz
Channels	4
Vertical Resolution	8 bits
Display Type	TFT LCD
Input Coupling	AC, DC, GND
Timebase Accuracy	± 5 ppm
Vertical Sensitivity	1 mV/div to 1 V/div
Input Impedance	50 Ω, 1 MΩ
Display Size	10.4 inches
Maximum Input Voltage	400 V (DC + AC peak)
Trigger Modes	Edge
Interface	USB, Ethernet, GPIB
Operating Temperature	0 to 50 °C
Weight	12 kg