Leica DMi8 - Storage and Transport; Ambient Conditions

3. SAF ET Y NOTES
3.5 Storage and transport
Transport
Caution!
Transport and storage at -20 °C – +85 °C and max. 90%
humidity.
For shipping or transporting the microscope and its acces-
sory components, the original packaging should be used.
As a precaution to prevent damage from vibrations, the fol-
lowing components should be disassembled and packaged
separately:
t6OTDSFXUIFPCKFDUJWFT
t4FDVSFUIFPCKFDUJWFOPTFQJFDFFHXJUIBEIFTJWFUBQF
t3FNPWFUIFFZFQJFDFT
t3FNPWFUIFDPOEFOTFS
t3FNPWFUIFTQFDJNFOTUBHF
t3FNPWFUIF5SBOTNJUUFE-JHIUBSN
t3FNPWFUIFMBNQIPVTJOHT
t4FDVSFUIFNBHOFUJDnVPSFTDFOUUVSSFUDPWFSFHXJUI
adhesive tape.
t3FNPWFBMMNPWJOHPSMPPTFQBSUT
t1SPUFDUUIFNJDSPTDPQFGSPNEVTUBOEEJSUVTJOHBQMBTUJD
bag.
Weight
CAUTION
At a full load, the microscope weighs more than 18
kg. The user must take corresponding precautions for
transporting the instrument.
Caution!
For transport, always remove all components listed un-
der "Transport!".
3.6 Ambient conditions
Caution!
This microscope may not be used at elevations over
2000 m above sea level.
Caution!
Do not use this instrument near sources of high electro-
magnetic radiation (for example, unshielded, intention-
ally operated ultra-high frequency sources), because
these can disrupt proper operation.
We recommend assessing the electromagnetic environ-
ment before operation of this instrument and then giving
corresponding instructions.
18