Leica DMi8 - Objectives

5. OPERATION - OBJECTIVES
5.3 Objectives
! Caution:
If necessary, first lower the focus to prevent damaging the
objective front lenses!
5.3.1 Changing objectives
Leica DMi8 with manual objective nosepiece
t$POmHVSFBOPCKFDUJWFCZSPUBUJOHUIFPCKFDUJWFOPTF-
piece on the knurled disk.
During the manual objective change, be sure that the
nosepiece locks into place.
Leica DMi8 with manually encoded objective nosepiece
t$POmHVSFBOPCKFDUJWFCZSPUBUJOHUIFPCKFDUJWFOPTF-
piece on the knurled disk.
During the manual objective change, be sure that the
nosepiece locks into place.
The LED assigned to the selected objective on the front
side of the microscope is illuminated.
Leica DMi8 with motorized objective nosepiece and front
operating panel with function keys
t$POmHVSFBOPCKFDUJWFCZQSFTTJOHUIFDPSSFTQPOEJOHPC-
jective changer button on the keypad of the front side of
the microscope.
The LED of the objective changer button is illuminated.
a Keypad for encoded objective nosepiece
b Keypad for encoded objective nosepiece and coded
fluo turret
a
b
a Keypad for motorized objective nosepiece
b Keypad for motorized nosepiece and motorized fluo tur-
ret
a b
46