Leica DMi8 - Fluorescence

5. OPERATION - ILLUMINATION
Adjusting the Transmitted Light brightness using the Touch
Screen:
t*GOFDFTTBSZTXJUDIUPUIF5SBOTNJUUFE-JHIUBYJT5-VT-
ing the TL key.
t"EKVTUUIFJOUFOTJUZVTJOH+ and –.
The setting can be made in coarse and fine steps in a
range from 0 to 255. Pressing the middle key, which also
displays the current value, switches between coarse and
fine adjustment.
tThe intensity is individually adjusted and stored for each
objective and contrast method.
5.2.2 Fluorescence
Leica DMi8 with manual encoded fluorescence
t*GOFDFTTBSZmSTUTXJUDIPWFSUPUIFnVPSFTDFODFBYJT
(Fluor) by opening the shutter (pull out switch rod at the
manual integrated fluorescence axis or on the manual ex-
ternal fluorescence axis).
t4FUUIFMJHIUJOUFOTJUZPOUIFLeica EL6000 compact light
source.
(See separate Instructions for Use).
CAUTION
Do not switch on the light source until the light guide is
connected to the microscope.
Uncontrolled light output from the light guide poses a
blinding hazard!
There is also a burn hazard at the light guide output!
42