Leica DMi8 - 5 Operation

5. OPERATION
5. Operation
Caution!
The microscope may only be set up, installed and put
into operation by authorized Leica personnel!
Caution!
The microscope may only be operated by personnel who
have been instructed by an authorized Leica employee!
Note:
If at all possible, avoid touching optical surfaces such as
the lens surfaces on the objective. If fingerprints do appear
on the glass surfaces, remove them with a soft leather or
linen cloth. Even small traces of finger perspiration can
damage the surfaces in a short time. For additional instruc-
tions, see the chapter entitled "Care of the Instrument" o S.
89
Note:
Operating the motorized components using the Leica
STP4000/8000 control panel is described in separate In-
structions for Use.
Note:
For information about using the LAS X software, refer to the
corresponding online help.
38