2. INTENDED PURPOSE OF THE MICROSCOPE
Caution!
The manufacturer assumes no liability for damage
caused by, or any risks arising from, using the micro-
scope for other purposes than those for which they are
intended or not using them within the speciļ¬cations of
Leica Microsystems CMS GmbH.
In such cases, the Declaration of Conformity shall be in-
valid.
WARNING
Notes on handling laser devices
In the standard design without additional laser safety
precautions, the microscopes are not suitable for cou-
pling laser radiation (such as to the camera ports), since
this radiation poses a hazard for the user (eye injury in
particular).
For use of the microscope with lasers,
Leica Microsystems CMS GmbH offers special micro-
scope variants with additional safety features. Laser
couplings require corresponding safety devices that
have to be inspected and installed by trained personnel.
For further information, please contact your authorized
Leica Microsystems CMS GmbH representative.
7
To Next Page
Loading...
