Field Option Description
Pressure: Sets the units shown for all pressure elds.
hPa Hecto Pascal.
mbar Millibar.
mmHg Millimeter mercury.
inHg Inch mercury.
DistanceUnit: Sets the units shown for all distance and
coordinate related elds.
m Metres [m].
US-ft US feet [ft].
INT-ft International feet [].
ft-in1/16 US feet-inch-1/16 inch [ft].
DistanceDec: Sets the number of decimal places shown
for all distance elds. This is for data display
and does not apply to data export or stor-
age.
3 Displays distance with three decimals.
4 Displays distance with four decimals.
5.2 Parameters Settings
1. Select Setting from the Main Menu.
2. From the Setting menu, select Parameters Setting.
Key Description
OK To conrm the entered values and to continue the process.
Description of elds
Field Option Description
Com-
pensator:
ON To turn the compensator on.
OFF To turn the compensator off.
Hz-Correc-
tion:
ON Horizontal corrections are activated. For
normal operation the horizontal correction
should remain active. Each measured hori-
zontal angle will be corrected, depending on
the vertical angle.
OFF Horizontal corrections are deactivated.
☞
Turn the compensator off, if
the instrument is mounted on
unstable ground, such as on a
shaking platform or a ship. Other-
wise, the compensation exceeds
the limit caused by shaking, which
will interrupt the surveying due to
warning messages.
Access
Meas. Parameters
Settings 37
To Next Page
