Leica TS01 - Road Data Transfer Operations

Field Option Description
U/D: Editable eld Offset to up or down.
Positive up.
Negative down.
Set to zero to set out in the middle.
Key Description
hr To enter a prism height.
Meas To execute a distance measurement and store the displayed
values.
Store To save the displayed values without executing a distance
measurment.
To display the next softkey level and elds.
Back To return to the last active screen.
List To display the list of available points.
Coord To display and check the coordinates for set out.
Description of elds
Field Option Description
Chainage: Selectable
list
Selected chainage to stake out.
dHR: Display only Perpendicular offset to alignment. The direc-
tion is correct when "0" is displayed.
dHD: Display only Horizontal offset: Positive if the stake out
point is further away than the measured
point.
HDc Display only Height difference between the measured
point and the dened height.
7.10.5 Data Transfer
Road data can be exported to and imported from the USB memory stick.
No additional software is required for the transfer.
Select Data Transfer from the Road menu.
Key Description
Back To return to the last active screen.
OK To select the le format and continue with the export.
Description of elds
Field Option Description
Mode: Selectable
list
Select between data import and export.
Data type: Data type to be transferred.
Angle SO 1/3
Description
Access
Road SO-Data trans-
fer
Apps 75