Leica TS01 - Page 76

Field Option Description
Control
point
Available for data import.
The calculated coordinate data.
H Element Available for data import.
The horizontal alignment.
H Cross
point
Available for data import.
The intersection point
Control
point
Available for data export.
The calculated coordinate data.
Road SO
result
Available for data export.
The coordinates of the stake out results.
H alignment Available for data export.
The horizontal alignment.
Device: USB The memory device to which data are expor-
ted.
Overwrite: Yes Set for Mode:: Import.
Existing data are overwritten.
☞
Download existing data rst to the
USB stick for a backup.
No Set for Mode:: Export.
Existing data of the same type are not over-
written.
Type Folder on USB stick Format
Export \ROAD
•
Chainage points:
*.FPT
•
Alignement denition:
*.HLN
•
Road Set out points:
*.STR
Import \ROAD
•
Chainage points:
*.FPT
•
Alignement denition:
*.HLN
☞
The data must follow the stated standards.
Example
control point (USB Drive:\Road\Road.FPT)
chainage,coord_n,coord_e,coord_h
line_element (USB Drive:\Road\Road.HLN)
type,startpile,coord_n,coord_e,startAZ //start point type:0
type,length //straight type:1
type,radius,length //circular arc type:2
type,length,radius_start,radius_end //spiral type:3
☞
Road data format for
import
76 Apps