Leica TS01 - Importing Data from USB

10.2 Importing Data
Data can be imported to the internal memory of the instrument via USB
memory stick. Data are imported from the folder \JOBS of the USB memory
stick.
A USB memory stick can be inserted and removed. No additional software is
required for the transfer.
When importing data, the instrument automatically stores the le in a direct-
ory folder based on the le extension. The following data formats can be
imported:
Data Type File extension Recognised as
ASCII any ASCII le extension
e.g. .txt
Fixpoints
1. Select Transfer in the Main Menu.
2. Select Data Import in the Data Transfer menu.
Key Description
Back To return to the last active screen.
OK To select the le format and continue with the import.
Description of elds
Field Option Description
From: USB-Stick Only option
to: Instrument Only option
File: Single File Only option
1. Press OK in the Data Import screen to proceed to the le directory
of the memory device.
2. Select the le to be imported and press OK.
☞
Files for importing must be placed in the \JOBS folder.
3. Dene the job name for the imported le.
4. Press OK to proceed
5. Dene the delimiter value, the units and the data elds of the le
and press OK to continue.
6. A message will display once the le has been successfully imported.
Description
Importable data
formats
Access
Data Import
Import data step-by-
step
Data Transfer 83