Leica TS01 - Orientation with Angle; Orientation with Coordinates

6.4.2 Orientation with Angle
Select Angle Orientation in the Backsight screen.
Key Description
OK To conrm the entered values and continue in the process.
Description of elds
Field Option Description
PointID: Editable eld Point ID of the backsight point.
Hz: Editable eld The azimuth between survey point and back-
sight point.
6.4.3 Orientation with Coordinates
Select Coordinates Orientation in the Backsight screen.
Key Description
Value To search for a point.
Coord To open the manual coordinate entry screen.
OK To conrm the entered values and continue in the process.
Description of elds
Field Option Description
E :, N :, Z : Display only The coordinates of the station.
☞
The coordinates must be based on
plane coordinates (X and Y). Enter
the instrument height if necessary.
PointID: Editable eld Point ID of the backsight point.
hr Editable eld Height of the reector.
Next step
Find an existing backsight point in the pointsearch or enter ENZ coordinates
for a new point. Press OK to continue to Backsight Check.
Key Description
Meas To start distance and angle measurements.
To calculate and display azimuth and distance.
Coord To display calculated coordinates.
NO To reject the orientation and to return to BS coordinate.
YES To set the orientation.
Description of elds
Field Option Description
Hz: Display only Horizontal direction to the target point.
CAL. HD: Display only Horizontal distance to the target point.
Access
Select Orientation
Access
BS coordinate
Backsight Check
Apps - Getting Started 47