2. Tighten the articulated joints on the tripod head enough to keep the
tripod legs open when lifting the tripod off the ground.
3. Tighten the Allen screws of the tripod legs.
11.2 System Information
The System Information screen displays instrument, system and rmware
information, as well as settings for the date and time.
☞
Please provide the instrument-related information, such as instru-
ment type and serial number, as well as the rmware version and
build number when contacting support.
1. Select Tools in the Main Menu.
2. Select System Information in the Tools menu.
Key Description
Format To format the memory.
☞
By activating the format command all data will be
lost. Make sure that all important data has been
backed up before formatting.
Back To return to the last active screen.
Description of elds
Field Option Description
First line Displays the current date and time.
Type : Display only Displays the instrument type.
SN: Display only Displays the serial number of the instrument.
Firmware: Display only Displays the rmware version number
installed on the instrument.
EDM-FW: Display only Displays the version number of the EDM
rmware.
11.3 Loading Firmware or License
The software can be loaded via a USB memory stick. This process is described
below.
1. Select Tools in the Main Menu.
2. Select Upload FW in the Tools menu.
Never disconnect the power supply during the system upload process. The
battery must be at least 30% capacity before commencing the upload.
1. Store the rmware or license les in the root directory of the USB
stick. The upload le has the extension *.key.
2. Insert the USB stick into the instrument.
3. Select Upload FW from the Main Menu.
Description
Access
System information
Description
Access
☞
Loading rmware or
license step-by-step
90 Tools
To Next Page
