Leica TS01 - Working with USB Memory Sticks

Field Option Description
Fix: Display only The number of known point saved in the
selected job.
Meas. REC: Display only The number of recorded measurements
saved in the selected job.
Used Mem.: Display only The percentage of used memory by this job.
9.3 Deleting the Memory
1. Select Data Manager in the Main Menu.
2. Select Erase Memory in the Data Manager menu.
Key Description
Back To return to the last active screen.
Delete To delete the selected records.
Description of elds
Field Option Description
Data type: Job Delete a all data (measurements and known
point).
Observation Delete only measurements.
Known
Point
Delete only xed point.
Job: Single Job Delete only one particular job.
All jobs Delete all job at once.
SelJob: Selectable
list
Available for Job:: Single Job
Displays the selected job.
9.4 Working with a USB Memory Stick
Always return to the Main Menu before removing the USB memory stick.
•
Keep the USB memory stick dry.
•
Use it only within the specied temperature range, -40°C to +85°C (-40°F
to +185°F).
•
Protect the USB memory stick from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent
damage to the USB memory stick.
Whilst other USB memory sticks may be used, Leica Geosystems recommends
Leica industrial grade USB memory sticks and cannot be held responsible for
data loss or any other error that may occur when using a non-Leica USB
memory stick.
Access
Erase Memory
☞
☞
☞
80 Data Management