7 Apps
7.1 Common Fields
The following table describes common elds that are found within the rm-
ware apps. These elds are described here once and not repeated in the app
chapters unless the eld has a specic meaning within that app.
Field Description
PointID: Point ID of the point.
hr Height of the reector.
Hz: Horizontal direction to the point.
V : Vertical angle to the point.
Hd : Horizontal distance to the point.
Sd : Slope distance to the point.
Height Height to the point.
E : Easting coordinate of the point.
N : Northing coordinate of the point.
Z : Height coordinate of the point.
7.2 Survey
Survey is an app used for the measurement of an unlimited number of points.
It includes pre-settings for the job, station and orientation prior to beginning a
survey.
1. Select Survey from the Main Menu.
2. Complete the pre-settings. Refer to 6.2 Starting an App.
Key Description
Meas To execute a distance measurement and store the displayed
values.
Store To save the displayed values without executing a distance
measurment.
Dist To execute a distance measurement.
To switch between individual and running point numbers.
Code To add a code to the measured point.
OffSet To apply an offset to the measurement.
7.3 Set Out
Set Out is an app used to place marks in the eld at predetermined points.
These predetermined points are the points to be staked. The points to be
staked may already exist in a job on the instrument, or be manually entered.
Description of elds
Description
Access
Survey
Description
Apps 49
To Next Page
