Leica TS01 - Angle Offset

Field Option Description
Left Perpendicular offset to the left of the meas-
ured point.
☞
The angle between the line con-
necting target point and calculated
offset point and the line connect-
ing instrument station and target
point must be 90°.
Right Perpendicular offset to the right of the
measured point.
☞
The angle between the line con-
necting target point and calculated
offset point and the line connect-
ing instrument station and target
point must be 90°.
Up Longitudinal offset. Closer than the meas-
ured point.
☞
The surveying point must be on
the line between instrument sta-
tion and measured point
Down Longitudinal offset. Further away than the
measured point.
☞
The surveying point must be on
the line between instrument sta-
tion and measured point
hr Editable eld Height of the reector.
7.4.3 Angle Offset
This function calculates the target point coordinates if it is not possible to set
up the reector, or to aim at the target point directly. The offset point and the
measurement point must have the same distance to the instrument.
Select Angle Offset from the OffSet menu.
☞
Set the measured point to the left or right of the offset point. The
distance from the instrument station must be the same.
Key Description
Meas To execute a distance measurement and store the displayed
values.
Dist To execute a distance measurement.
Store To save the displayed values without executing a distance
measurment.
Shift To display Easting, Northing and Height or slope distance,
vertical angle and horizontal angle.
Description
Access
Enter offset values
and result
Apps 53