LELY WELGER RPC 445 TORNADO User Manual

THE MACHINE
LELY WELGER y RPC 445 Tornado 37
5.1.1 "PRO-LINK" control box
Attention, danger of injury!
Never operate the machine from two positions
simultaneously, i.e. never operate the machine
simultaneously via the PRO-LINK control box and manual
the control box. In case of emergency: Immediately stop
(shut down) the machine by pressing an emergency stop
palm button.
The machine is operated via the PRO-LINK control box. During
operation the current operating status of the baler and of the
wrapper is indicated in the display of the PRO-LINK control box.
See separate operating manual "PRO-LINK for RPC 445".
5.1.2 Control box
Attention, danger of injury!
Never operate the machine from two positions
simultaneously, i.e. never operate the machine
simultaneously via the PRO-LINK control box and the
manual control box. In case of emergency: Immediately stop
(shut down) the machine by pressing an emergency stop
palm button.
Attention, impact monitor deactivated!
Use the manual control box exclusively for maintenance
work and fault clearance (e.g. bale jammed).
When the machine is operated via the manual control box,
impact monitoring is not active. Operate the machine with
utmost care to prevent major damage.
Daily production with the impact monitor deactivated is not
permissible. Operation of the machine during daily
production is permitted exclusively via the PRO-LINK control
box.
For maintenance work and fault clearance the following
machine assemblies can be operated manually via the manual
control box:
 tailgate
 bale transfer unit
 wrapping table
 film stretching unit
 wrapping ring (height)
 film clamping device
 film knife

LELY WELGER RPC 445 TORNADO Specifications

General

Brand	LELY WELGER
Model	RPC 445 TORNADO
Category	Farm Equipment
Language	English