FIELD DEPLOYMENT
LELY WELGER y RPC 445 Tornado 91
9.10 Adjusting the bale diameter
Attention!
The bale diameter must be selected so that the bale weight
does not exceed 1750 kg. If necessary, the bale diameter
values stated in the following table must be reduced.
Crop material Bale diameter
Silage 1.00 m – 1.55 m (max. 1750 kg)
Straw 0.90 m – 1.60 m
The desired bale diameter setpoint is set and indicated on
the PRO-LINK control box: see separate operating manual
"PRO-LINK for RPC 445", chapter "Setting the bale
diameter setpoint".
To Next Page
Loading...
Need help?
General
