FIELD DEPLOYMENT
80 LELY WELGER y RPC 445 Tornado
Attention, danger of injury!
Prior to first start: Make yourself familiar with the control box
and the functions of this machine.
Before inserting the tying material (net) or wrapping film:
Switch off the power take-off shaft, switch off the tractor
engine, remove the ignition key. Disconnect control
electronics from power supply (disconnect electrical
connection to the tractor).
Nobody must stay between tractor and machine while the
tractor engine is running.
Never operate the machine with defective or removed
protective devices (e.g. guard casings and distance bracket)!
Before opening any protective devices: Switch off the power
take-off shaft, switch off the tractor engine, remove the
ignition key. Disconnect control electronics from power
supply (disconnect electrical connection to the tractor).
Attention, danger of damage!
The machine must never be used without the bale wrapper.
If film wrapping is not desired: select pass-through mode
(see separate operating manual "PRO-LINK for RPC 445",
chapter "Wrap bale or pass bale through?").