Figure138.Alignthememorymodule
Step6.ReinstalltheServeRAIDadapter(see“Installinganadapter”onpage216).
Step7.Installandlocktheleft-sidecover(see“Installingtheleft-sidecover”onpage185).
Ifyouhavereplacedaservercomponentorinstalledanoptionaldeviceintheserver,youneedtoreconnect
thepowercordsandallexternalcables,andturnontheserverandperipheraldevices.
RemovingaPCI-Xbracket
UsethisinformationtoremoveaPCI-Xbracket.
Readthesafetyinformationin“Safety”onpagevand“Installationguidelines”onpage35.
Ifyouarereplacingaservercomponentintheserver,youneedtoturnofftheserverandperipheraldevices,
anddisconnectthepowercordsandallexternalcables.
ToremoveaPCI-Xbracket,completethefollowingsteps.
Step1.Carefullyturntheserveronitssidesothatitislyingflat,withthecoverfacingup.
Attention:Donotallowtheservertofallover.
Step2.Unlockandremovetheleft-sidecover(see“Removingtheleft-sidecover”onpage184).
Step3.RemovetheadapterifoneisinstalledonthePCI-Xbracket(see“Removinganadapter”onpage
213).
Step4.RemovethescrewthatsecuresthePCI-Xbrackettotheserverchassis.
Step5.PullthePCI-XbracketoutofPCIslot1andsaveitforfutureuse.
Chapter6.Removingandreplacingcomponents225