• YouTube: https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku: https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1. Make preparations for this task.
a. Remove the server cover. See “Remove the server cover” on page 188.
b. Remove the front door. See “Remove the front door” on page 107.
Step 2. Remove the front bezel.
Figure 72. Front bezel removal
a. Lift the three plastic tabs to release the left side of the bezel from the chassis.
b.
Pivot the bezel as shown to remove it from the chassis.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front bezel
Use this information to install the front bezel.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
106
ThinkSystem ST650 V2 Maintenance Manual
To Next Page
Loading...
