Lenovo ThinkSystem ST650 V2 - Install the Intrusion Switch

Figure 90. Intrusion switch removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the intrusion switch
Use this information to install the intrusion switch.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
Attention:
• Read “Installation guidelines” on page 57 to ensure that you work safely.
128
ThinkSystem ST650 V2 Maintenance Manual