Figure 33. Cable routing for SAS tape drive to PCIe slot 9
USB tape drive
From To
1 Power connector on tape drive Power distribution board: ODD power connector
2 Signal connector on tape drive System board: Internal USB connector 4
Notes:
• Connections between connectors;
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
• When routing the cables, ensure that all cables are routed appropriately through the cable guides and
cable clips.
Figure 34. Cable routing for the USB tape drive
Chapter 3. Internal cable routing 55
To Next Page
Loading...
