Lenovo ThinkSystem ST650 V2 - Page 97

• YouTube: https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku: https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1. Lay the server on its side.
Step 2. Use a screwdriver to remove the three screws that secure the right EIA bracket; then, remove the
right EIA bracket.
Figure 53. Right EIA bracket removal
Step 3. Use a screwdriver to remove the three screws that secure the left EIA bracket; then, remove the left
EIA bracket.
Chapter 4. Hardware replacement procedures 87