Step4.IfanadapterisinstalledinthePCIriser-cardassembly,disconnectanycablesthatareconnected
totheadapter.
Step5.GraspbothendsorthehandleofthePCIriser-cardassemblyandliftitoutofthePCIriser-card
slotonthesystemboard.ThefollowingillustrationsshowthedifferentPCIriser-cardassembly
configurationsthatcouldbepresentintheserver.
Note:Whenthe2.5-inchhot-swaprearharddiskdrivekitisused,onlythePCIriser-cardassembly
withonex8orx16low-profileslotcanbeusedforconnector2onthesystemboard.
2.5-inch hot-swap rear
hard disk drive kit
1U PCIe Riser 2 assembly
(2 x low profile; x8 or x16)
Figure89.PCIriser-cardassemblyremoval(1)
1U PCIe Riser 2 assembly
(1x full-height half-length; x16
and 1x low profile; x8 or x16)
1U PCIe Riser 1 assembly
(1x ML2; x16)
Figure90.PCIriser-cardassemblyremoval(2)
170LenovoSystemx3550M5InstallationandServiceGuide