Lenovo x3550 M5 - Starting the Setup Utility; Setup Utility Menu Choices

•Setandchangepasswords
•Setthestartupcharacteristicsoftheserverandtheorderofstartupdevices
•Setandchangesettingsforadvancedhardwarefeatures
•View,set,andchangesettingsforpower-managementfeatures
•Viewandclearerrorlogs
•Changeinterruptrequest(IRQ)settings
•Resolveconfigurationconflicts
StartingtheSetuputility
UsethisinformationtostarttheSetuputility.
TostarttheSetuputility,completethefollowingsteps:
Step1.Turnontheserver.
Note:Approximatelyfiveto10secondsaftertheserverisconnectedtopower,thepower-control
buttonbecomesactive.
Step2.Whentheprompt<F1>Setupisdisplayed,pressF1.Ifyouhavesetanadministratorpassword,
youmusttypetheadministratorpasswordtoaccessthefullSetuputilitymenu.Ifyoudonottype
theadministratorpassword,alimitedSetuputilitymenuisavailable.
Step3.Selectsettingstovieworchange.
Setuputilitymenuchoices
UsetheSetuputilitymainmenutoviewandconfigureserverconfigurationdataandsettings.
ThefollowingchoicesareontheSetuputilitymainmenufortheUEFI.Dependingontheversionofthe
firmware,somemenuchoicesmightdifferslightlyfromthesedescriptions.
•SystemInformation
Selectthischoicetoviewinformationabouttheserver.Whenyoumakechangesthroughotherchoices
intheSetuputility,someofthosechangesarereflectedinthesysteminformation;youcannotchange
settingsdirectlyinthesysteminformation.ThischoiceisonthefullSetuputilitymenuonly.
–SystemSummary
Selectthischoicetoviewconfigurationinformation,includingtheID,speed,andcachesizeofthe
microprocessors,machinetypeandmodeloftheserver,theserialnumber,thesystemUUID,andthe
amountofinstalledmemory.Whenyoumakeconfigurationchangesthroughotheroptionsinthe
Setuputility,thechangesarereflectedinthesystemsummary;youcannotchangesettingsdirectlyin
thesystemsummary.
–ProductData
Selectthischoicetoviewthesystem-boardidentifier,therevisionlevelorissuedateofthefirmware,
theintegratedmanagementmoduleanddiagnosticscode,andtheversionanddate.
ThischoiceisonthefullSetuputilitymenuonly.
•SystemSettings
Selectthischoicetovieworchangetheservercomponentsettings.
–AdaptersandUEFIDrivers
SelectthischoicetoviewinformationabouttheUEFI1.10andUEFI2.0compliantadaptersand
driversinstalledintheserver.
–Processors
Chapter2.Configuring37