Lenovo x3550 M5 - Removing the Front Video Connector Assembly

Front USB assembly
Figure157.FrontUSBconnectorassemblyinstallationforfour3.5-inchhot-swaporsimple-swaphard
diskdriveserverconfiguration
Step3.Carefullypushthemediacagebackintothechassis(see“Replacingthemediacage”onpage
231).Remembertoreconnectthecablesthatwereremovedfromthesystemboard.
Step4.Reinstallthecover(see“Replacingthecover”onpage120).
Step5.Reconnectthepowercordsandanycablesthatyouremoved.
Step6.Slidetheserverintotherack.
Step7.Turnontheperipheraldevicesandtheserver.
Removingthefrontvideoconnectorassembly
Usethisinformationtoremovethefrontvideoconnectorassembly.
Toremovethefrontvideoconnectorassembly,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page116.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercordsandallexternalcables,
ifnecessary.
Step3.Removethecover(see“Removingthecover”onpage119).
Step4.Removethemediacage(see“Removingthemediacage”onpage228).
Step5.Loosenthescrewsthatsecurethefrontvideoconnectorassemblytothemediacage;then,remove
theassemblyfromthemediacage.
Note:Refertotheillustrationthatappliestoyourparticularserverconfiguration.
Eight2.5-inchhot-swaporsimple-swapharddiskdriveserverconfiguration:
238LenovoSystemx3550M5InstallationandServiceGuide