USB embedded
hypervisor
flash device
Figure140.USBhypervisorflashdeviceremoval
Ifyouareinstructedtoreturntheflashdevice,followallpackaginginstructions,anduseanypackaging
materialsforshippingthataresuppliedtoyou.
ReplacingaUSBembeddedhypervisorflashdevice
UsethisinformationtoreplaceaUSBembeddedhypervisorflashdevice.
ToinstallaUSBhypervisorflashdevice,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page116.
Step2.Turnofftheserverandperipheraldevicesanddisconnectthepowercords.
Step3.Removethecover(see“Removingthecover”onpage119).
Step4.AligntheflashdevicewiththeconnectoronthesystemboardandpushitintotheUSBconnector
untilitisfirmlyseated.
222LenovoSystemx3550M5InstallationandServiceGuide