Four3.5-inchhot-swaporsimple-swapharddiskdriveserverconfiguration:
Front USB assembly
connector
Front video
connector
Figure151.Mediacageinstallationforfour3.5-inchhot-swaporsimple-swapharddiskdriveserver
configuration
Step3.Reinstalltheairbaffle(see“Replacingtheairbaffle”onpage122).
Step4.Reinstallthecover(see“Replacingthecover”onpage120).
Step5.Slidetheserverintotherack.
Step6.Reconnectthepowercordsandanycablesthatyouremoved.
Step7.Turnontheperipheraldevicesandtheserver.
RemovingthefrontUSBconnectorassembly
UsethisinformationtoremovethefrontUSBconnectorassembly.
ToremovethefrontUSBconnectorassembly,completethefollowingsteps:
Step1.Readthesafetyinformationthatbeginson“Safety”onpagevand“Installationguidelines”on
page116.
Step2.Turnofftheserverandperipheraldevicesanddisconnectallpowercords;then,removethe
cover(see“Removingthecover”onpage119).
Step3.Removethemediacage(see“Removingthemediacage”onpage228).
Step4.RemovethefrontUSBconnectorassemblyfromthemediacage.
Notes:
234LenovoSystemx3550M5InstallationandServiceGuide