Stepsforinstallinga4x3.5-inchhot-swapharddiskdrivebackplane.
a.Carefullylowertheharddiskdrivebackplaneuntilitisfullyseatedinthechassis.
b.Securethebackplanetothechassisbypressingthereleaselatches.
4 x 3.5-inch hard disk drive backplane
Figure129.4x3.5-inchhot-swapharddiskdrivebackplaneinstallation
Step4.RoutethesignalcablefromthedrivebackplanealongthechassisandconnectittotheSAS/SATA
controllerconnectors.Then,routethepowercableandtheconfigurationcablefromthedrive
backplanealongthechassisandconnectittotheSAS/SATApowerconnectorandSAS/SATA
configurationconnector.Thefollowingillustrationshowsthecableroutingandconnectorsforthe
2.5-inchand3.5-inchhot-swapbackplanes.
Chapter5.Removingandreplacingcomponents211
To Next Page
Loading...
