Lenze 8400 protec - 3 Product Description; Device Features

Product description
Device features
3

20
EDS84DPS424 EN 5.0
3 Product description
3.1 Device features
Decentralised 8400 protec frequency inverter Version
Features HighLine StateLine EMS
Power range 0.75 ... 7.5 kW 0.75 ... 4 kW 0.75 ... 7.5 kW
Mounting type Wall−mounted device
Brake management Control of a mechanical motor holding brake
24 V supply
Internal (depending on mains voltage)   
24 V buffer voltage possible
(for maintaining the control functionality
in the case of mains failure)
  −
Interfaces
Digital inputs, 6 6 14
can be configured as outputs 2 2 2 or 4
Analog inputs
1
1
1
or optionally synchronous serial interface
(SSI)
−
Optional: RS485 or/and RS422 − − 2 x RS485
2 x RS422
1 x RS485 / RS422
each
Remote control, infrared (IrRC)  (from SW V12) − 
Data interface, infrared (IrDA) − − 
Optional:
Drive−based safety Safety option (SO) 10, 20 or 30 −
Operation in generator mode Internal or external brake resistor
Control element
Various service switches
Rocker switch
Operation
200 % overload current for 3 s   
S ramps for jerk−free acceleration and
deceleration
  
Protection against restart for cyclic mains
switching
  
Technology applications
Speed actuating drive   
Switch−off positioning   
Absolute positioning  − 
Table positioning  − 
EMS−specific communication
Half wave − − 
Half wave coded − − 
Power wave − − 
DECA BUS − − 
Inductive energy transmission − − 
PLC functionality − − 