About this documentation
Document history
1
7
EDS84DPS424 EN 5.0
1 About this documentation
Contents
The hardware manual contains the complete information on the intended use of the 8400
protec controllers in the StateLine and HighLine versions.
Validity
These instructions apply to decentralised 8400 protec frequency inverters with the
following type designation:
Type designation From HW From SW
E84DSxxx... (StateLine) VA 01.01
E84DHxxx... (HighLine) VA 02.02
E84DDxxx... (EMS) VA 01.00
E84DExxx... (EMS) VA 01.00
E84DFxxx... (EMS) VA 01.00
E84DLxxx... (EMS) VA 01.00
E84DPxxx... (EMS) VA 01.00
Further information on the type code can be obtained from the "Product description"
chapter.
Target group
This hardware manual is intended for all persons who design, install, commission, and set
8400 protec controllers.
Tip!
Information and auxiliary devices related to the Lenze products can be found
in the download area at
http://www.Lenze.com
1.1 Document history
Material number Version Description
.M^h 5.0 10/2013 TD15 Additions by UL
13428102 4.1 04/2013 TD15 Expansion up to 7.5 kW and corrections
13398992 3.0 05/2012 TD15 Additions and corrections
13384749 2.0 06/2011 TD15 Extended by EMS version
13368848 1.1 05/2011 TD15 General revision
13337296 1.0 04/2010 TD15 First edition
To Next Page
Loading...
