Lenze 8400 protec - Page 45

Technical data
General data and operating conditions
4

45
EDS84DPS424 EN 5.0
EMS version
Half−wave system
E84DE..., E84DL...
Control bar
Z system No
Number 2
Signal level
Full wave
Positive half wave
Negative half wave
Coded half wave
Reference voltage or switched
voltage
L3
L1 possible with different hardware configuration
Rated voltage
400−480 V AC, 50−60 Hz
Coded half wave: 230 V AC, 50−60 Hz
Switching threshold 50 Hz: 270 V AC (243 ... 297 V AC)
60 Hz: 330 V AC (297 ... 363 V AC)
Power input 1.5 W (400 V AC) for 1 x half wave
Signalling bar
Number 1
Signal level
Full wave
Positive half wave
Negative half wave
Reference voltage or switched
voltage
L3
L1 possible with different hardware configuration
Short circuit protection PTC protection (500  connected in series)
Reference voltage 400 ... 480 V
Switching current max. 28 mA AC