LevelOne 53143703 - Managing Network Loss; Scheduling Network Loss Trigger

DSS-1000 User Manual
120
1
2
3.8 Managing Network Loss
When a camera suddenly disconnects from the network, DSS-1000 will trigger a network loss
notification by displaying a network loss icon and a beep sound.
By default, the trigger is enabled for 24 hours a day and 7 days a week. However, the beep
sound must be enabled and configured separately.
Scheduling Network Loss Trigger
1. On the Setup screen, click Schedule.
2. Select the camera from the camera list panel.
Item
Description
1
Event Handling
Schedule
 Event Handling: Enables event trigger.
 No Event Handling: Disables event trigger.
2
Time Table
Shows green cell if event trigger is enabled and gray cell if
event trigger is disabled.
3. Select either Event Handling or No Event Handling.